30-Yard Dumpster Rental in Maryland — The “Professional’s Choice”

The “Professional’s Choice” — Our 30-Yard Volume Container

The 30-yard “Professional’s Choice” is the box that big work happens in: demolition, new construction, whole-home renovations, multi-unit turnovers, and the layered roofs that keep Maryland roofers busy.
At 20′ × 8′ × 5.5′, it holds roughly 12 pickup truck loads — enough that most projects finish in one container instead of three hauls. Base price $549 with 2 tons included — the biggest allowance we carry — up to 15 tons maximum, at 15 days standard with swap-outs scheduled to the crew’s calendar.
Book online or call (410) 808-7000 — describe the site and the debris stream, and the container plan builds itself.

Specs & Pricing

Spec

Value

Dimensions

20′ L × 8′ W × 5.5′ H

Volume

~30 cubic yards — roughly 12 pickup truck loads

Base price

$549 — 2 tons included

Overage — trash & construction debris

$125/ton

Clean concrete, dirt, organic

$200 flat per load (up to 15 tons)

Max weight

15 tons

Rental period

15 days standard · $10/day beyond · swap-outs on schedule
All three sizes side by side: dumpster rental pricing.

What Goes in the Professional’s Choice

  • Demolition and gut renovations — whole-house guts and structural tear-outs produce volume fast; one 30 swallows what would fill three smaller boxes
  • New construction — framing scrap, packaging, cutoffs, and staging debris on active sites; the box that keeps the lot clean through the build
  • Warehouse and commercial clear-outs — racking, pallets, and obsolete inventory; figure one 30-yard per 1,500–2,500 square feet depending on contents, the standard math on the White Marsh corridor
  • Layered roof tear-offs — when the roof has two layers down, the 20-yard becomes a weight risk; the 30 takes the volume with margin
  • Large estates and multi-unit turnovers — full-house clearances with packed outbuildings; scheduled swaps keep the crew moving

Volume Work vs. Weight Work

The 30 is a volume container, and its best friend is the 15-yard “Heavy Lifter” on the same job: dense material (concrete, dirt, brick) half-fills any box — so serious demo projects run the 30 for structure and the 15 for the slab and footing work at the $200 flat rate. Mixed loads bill at $125/ton over the included 2 tons, weighed on the truck — the scale decides, not a guess.
On waterfront and corridor job sites — Havre de Grace bulkhead rebuilds, Route 40 fit-outs — the 30 is the staging default, placed tight to the work and swapped on cadence.

How It Works

1
Book online or call (410) 808-7000 — describe the project and the site; we’ll confirm the 30 and the swap plan
2
Same-week drop, placed to the work — dock aprons, staging areas, driveways with the footprint for it
3
Load through the walk-in rear door or over the rails — machinery welcome (loading tips)
4
Swap-outs and pulls on your calendar — 15 days standard per box; set the cadence at booking, one call adjusts it
First time sizing a big project? The quick-start rental guide covers the basics — or call and we’ll run the math with your square footage.
Book Now!
Call (410) 808-7000!

30-Yard FAQs

Figure one per 1,500–2,500 square feet depending on contents — we’ll walk the math with you and set a swap cadence so the project never waits on the box.

Yes where the driveway runs 20+ feet — it’s the same 8-foot width as our other containers, just longer and taller. Boards protect the surface, and placement on your own property needs no permit.

Two layers down on a typical home, yes: volume plus the safety margin on weight. Single-layer roofs usually fit the 20. Your roofer’s square count settles it.

That’s most of our 30-yard work — cadence set at booking, one call to adjust, pulls that don’t wait on office hours. Commercial customers get direct dispatch: the number rings the crew, not a queue.